Table of Contents
Advertisement
Setup Overview
1. Determine the installation location
To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor's
NOTEE:
screen area, on the table before laying the monitor face down when installing the monitor stand or mounting
accessories.
2. Install the remote control batteries
The remote control is powered by two 1.5 V AAA batteries.
To install or replace batteries:
• The batteries supplied with the remote control may become empty quickly depending on their condition.
NOTEE:
Therefore, replace them with new batteries early.
• If you do not intend to use the remote control for a long period of time, remove the batteries.
• Use manganese or alkaline batteries only.
3. Connect external equipment
• To protect the external equipment, turn off the main power before making connections.
• Refer to the user's manual of your equipment for further information.
Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in
NOTEE:
loss of image.
1
2
English - 11
4
3
Advertisement
Table of Contents
