Mounting Location; Orientation - NEC MultiSync M491 User Manual

Installing a safety wire


WARNINGN:
Please refer to


CAUTIONN:
Please refer to


NOTEN:
When installing, do not apply pressure to the LCD panel or excessive force to any part of the monitor by pushing or
leaning on it. This may cause the monitor to become distorted or damaged.
Handles for safety wire
(Fasten Force: 120 - 190 N•cm).

Mounting Location

WARNINGN:
Please refer to


NOTEN: Allow for adequate ventilation or provide air conditioning around the monitor, so that heat can properly dissipate away
from the monitor and from the mounting equipment.

Orientation

• When using the monitor in the portrait position, it should be rotated counterclockwise so that the right side is moved to the
top and the left side is moved to the bottom. Improper ventilation may shorten the lifetime of the monitor.


WARNINGN: Please refer to
"WARNING 9".
"CAUTION 7".
Safety wire for portrait
position (M651 only)
"WARNING 8".
"WARNING 8".
Safety wire for landscape position
English−15
Power Indicator