Mounting Location; Orientation - NEC MultiSync UN462VA User Manual

Mounting location

CAUTIONN:
• The ceiling or wall must be strong enough to support the monitor and mounting accessories.
• DO NOT install in locations where a door or gate can hit the unit.
• DO NOT install in areas where the unit will be subjected to strong vibrations and dust.
• DO NOT install the monitor next to a location where the main power supply is fed into the building.
• DO NOT install the monitor in a location where people can easily grab and hang onto the unit or the mounting equipment.
• When mounting in a recessed area, such as in a wall alcove, leave at least 4 inches (100 mm) of space between the monitor
and the wall for proper ventilation.


NOTEN: Allow for adequate ventilation or provide air conditioning around the monitor, so that heat can properly dissipate away
from the monitor and from the mounting equipment.

Orientation

• When using the monitor in the portrait position, it should be rotated clockwise so that the left side is moved to the top,
right side is moved to the bottom. This will allow for proper ventilation and will extend the lifetime of the monitor. Improper
ventilation may shorten the lifetime of the monitor.


CAUTIONN:
• Do not mount this monitor with any tilt.
• Do not mount this product face up, face down, or upside down for an extended period of time as it may cause permanent
damage to the screen.
English−12