Chapter 3 Installation; Warranty Information - THORLABS DFB13TK User Manual

Low-Noise DFB Laser System
Laser Warning
Avoid Exposure – Radiation Emitted from apertures. Do not look into the laser aperture while the
laser is on. Injury to the eye may result. Laser should not be turned on unless there is an optical
fiber connected to the laser output port. Caution – Use of controls or adjustments or performance
of procedures other than those specified herein may result in hazardous radiation exposure.
Laser Safety
Chapter 3 Installation

Warranty Information

This precision device is only serviceable if returned and properly packed into the complete original packaging
including the complete shipment plus the cardboard insert that holds the enclosed devices. If necessary, ask for
replacement packaging. Refer servicing to qualified personnel.
Packing List
The DFB13TK laser system consists of the following components:
• Low-Noise DFB Laser System
• DS12 Power Supply (12 V, 4 A)
USB-AB-72 USB 2.0 Type-A to Mini-B Cable, 72" (1.83 m) Long
•
FBC250 Connector and Bulkhead Cleaner
•
Page 10
This instrument should be kept clear of environments where liquid spills or condensing
moisture are likely. It is not water resistant. To avoid damage to the instrument, do not
expose it to spray, liquids, or solvents.
Chapter 3: Installation
TTN339662-D02