List Of States; List Of Tags - THORLABS DFB13TK User Manual

Low-Noise DFB Laser System
List of Commands
See corresponding subsections for details.
Command
laser [state]
write_param [tag] [value]
read_param [tag]
save_param [tag]
read_string [name]
savecfg
get_clock
update
reset
firmware_version
4.4.1

List of States

Corresponding to the 'laser' command
Command
on
off
4.4.2

List of Tags

Corresponding to the 'write_param,' 'read_param,' and 'save_param' commands
Rev. A, August 16, 2024
Set the user requested state of the laser.
Write a parameter to the device
Read a parameter from the device
Immediately write a parameter to EEPROM.
Read a string value from the device
Save all parameters on the main and optics boards to non-volatile
memory.
Gets the currently set time and date.
Places the system into a mode where it can accept firmware updates from
the PC.
Reset the system. Note that this will drop the USB connection.
Read the current firmware version number.
Set the requested state to on.
When system failures are cleared and interlock indicates OK, the laser till turn on.
When system errors occur or when interlock is lost, the laser is tuned off.
Laser is turned off.
Descriptions
Descriptions
Chapter 4: Operation
Page 13