Configure The Isdn Dialer Interface - Cisco 2620 Configuration Manual

Configuring the Digital Modem Network Module for the Cisco 3640 Router
Step 7
For more information about group asynchronous interfaces, refer to the "Asynchronous Configuration
Task List" section of the Cisco IOS Release 11.3 Dial Solutions Configuration Guide.

Configure the ISDN Dialer Interface

The ISDN dialer interface is the parent interface that holds the central protocol characteristics for the
ISDN D channels that are part of the dialer-rotary group. To configure the ISDN dialer interface,
perform the following tasks, beginning in global configuration mode:
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
For more information about configuring ISDN dialer interfaces, refer to the Cisco IOS Release 11.3 Dial
Solutions Configuration Guide.
Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers
3-56
group-range start-range
end-range
Command
interface Dialer number
ip unnumbered Loopback
number
no ip mroute-cache
encapsulation ppp
peer default ip address pool
name
dialer in-band
dialer-group number
no fair-queue
no cdp enable
ppp multilink
router eigrp
autonomous-system-number
network network-number
passive-interface Dialer
number
no auto-summary
Chapter 3 Configuring with the Command-Line Interface
Associate one or more interfaces to the
group interface so that all associated
interfaces can be configured through the
group interface.
Description
Define a dialer rotary group leader.
Enable IP processing on the loopback interface
without assigning an explicit IP address to the
interface.
Disable IP multicast fast switching.
Set the PPP as the encapsulation method used
by this interface.
Specify an IP address from the defined IP
address pool to be returned to a remote peer
connecting to this interface.
Specify that dial-on-demand routing (DDR) be
supported.
Assign this interface to the rotary dialer group.
Disable fair weighted queuing for this interface.
Disable CDP on this interface.
Enable Multilink PPP on this interface.
Configure the enhanced IGRP routing process.
Enable Enhanced IGRP.
Disable sending routing updates on this
interface.
Transmit subprefix routing information across
classful network boundaries.
OL-1957-04