Related Manuals for Holman Pro III
Summary of Contents for Holman Pro III
- Page 1 Instruction Guide Pro III Truck Rack Holman Rancho Cordova, CA 95742 800-343-7486 InstallationSupport@Holman.com 20240508R5 DATE: ________________...
-
Page 2: Table Of Contents
Always check for wires, fuel tanks and lines, brake lines and other important vehicle functionality items prior to drilling and installing all products. Too much weight will greatly reduce the stability of your vehicle. Holman makes no representation or warranty as to the amount of weight your vehicle can safely carry. - Page 3 • Read all instructions carefully, and follow each step in proper sequence, for ease and speed in assembling your rack. • These instructions cover the 80000 and 80020 Pro III Racks. • PROPER SEALANT APPLICATION IS CRITICAL TO PREVENTING WATER PENETRATION INSIDE THE RACK.
-
Page 4: Parts List
Instructions – Pro III Truck Rack Parts List For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST) Page 3... -
Page 5: Hardware Kit 18-00450B
Instructions – Pro III Truck Rack Parts List (Continued) Hardware Kit 18-00450B For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST) Page 4... - Page 6 Instructions – Pro III Truck Rack Hardware 18-00450B (Continued) For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST) Page 5...
-
Page 7: Hardware Kit 18-31571
Instructions – Pro III Truck Rack Hardware 18-00450B (Continued) Hardware Kit 18-31571 Tools Needed 1/2”, 9/16”, 3/4" Sockets and Wrench 3/4" Box Wrench 13/32” Drill Bit and Drill 5/32”, 3/16", 7/32”, 5/16” Allen Wrench Rubber Mallet #2 Philips Screwdriver Installation Preparation It is recommended the feet are secured to the truck bed using more than one type of method of attachment when mounting each foot. -
Page 8: Sealant Application Guidelines
Instructions – Pro III Truck Rack Sealant Application Guidelines • Proper sealant application is critical to preventing water penetration inside the rack. • Apply a healthy bead of sealant around every swaged joint as shown. Improper sealing can lead to water penetration and rust on inside surfaces. -
Page 9: Step 1B - Install Rear Feet
Instructions – Pro III Truck Rack Step 1B – Install Rear Feet • Position the rear footplates to the rear as near the tailgate as possible. • Holding the footplate firmly against the inside of the bed Pre-drilled rail, insert a 1/2” x 2-1/2”... -
Page 10: Step 3 - Install Front Leg
Instructions – Pro III Truck Rack Step 3 – Install Front Leg • Measure the center-to-center measurement between the front and rear footplate saddles. Final positioning of the front legs will follow. • Slide the front leg onto the front side channel. There Driver-side is a RIGHT and a LEFT. -
Page 11: Step 6 - Install Rear Crossbar
Instructions – Pro III Truck Rack Step 6 – Install Rear Crossbar • Set rear crossbar on table and using a clean, soft rubber mallet, install plastic caps onto the rear crossbar uprights, as shown here. Be sure the rear crossbar is oriented correctly. -
Page 12: Step 9 - Attach Legs To Feet
Instructions – Pro III Truck Rack Step 9 – Attach Legs to Feet • Lift rack and set legs into slotted channel. • Insert 1/2” x 3-3/4” hex head bolt and 1/2” flat washer through slotted channel and leg. • LOOSELY install 1/2” washer and 1/2” jam nut onto opposite end of 1/2”...
Need help?
Do you have a question about the Pro III and is the answer not in the manual?
Questions and answers