On The Flatbed - Microtek FileScan 2325 User Manual

On the Flatbed

This section shows you how to position a single-sheet document, such as a
single photograph or a page from a book, on the flatbed:
1. Raise the scanner lid (ADF).
2. Place the document to be scanned facing down on the glass surface of the
3. Lower the scanner lid on the scanner glass surface.
18 FileScan 2325 User's Manual
scanner. Position the top end of the document toward the left side of the
scanner, with its edge firmly aligned against the rulers of the scanner, as
shown in graph.
Keep calibration area
on the glass surface
clear and free of any
obstruction at all
time.