Notice On Using The Adf - Microtek FileScan 2325 User Manual

4. To prevent papers from skewing, align the stack of papers with the center of
the Document Feed Tray by sliding the two Guide Arms toward the stacked
papers.
5. Pull out the Tray Extender for long paper if needed.

Notice on Using the ADF

• The ADF is not designed for scanning photos; doing so may damage your
originals. Microtek accepts no responsibility for damage that may arise from
misuse of equipment.
• The ADF can handle the paper within the following specifications:
– Dimensions:
– Paper Weight:
– Document Feed:
• If the documents are torn, curled, or wrinkled, do not put them into the ADF
to scan, because they may cause paper jams.
• DO NOT use the ADF to scan documents with paper clips or staples because
they may cause paper jams or damage the scanner.
Guide Arms
Tray Extender
Min. 76.2 x 127 mm (3 x 5 in.)
Max. 216 x 3000 mm (8.5 x 118 in.)
60 to 125 g/m (16 to 28 lb.)
2
Up to 35 sheets of regular printing papers
FileScan 2325 User's Manual 17