Microtek FileScan 2325 User Manual page 20

5. Click the Show Preview Window and Show Setting Window tabs in the
6. Click the Preview button to perform a preliminary view of the entire image.
20 FileScan 2325 User's Manual
b) Select the appropriate image type in the Color Mode as your image
output type.
Select RGB Color (24 bits) to scan the
–
image in color.
– Select Grayscale (8 bits) to scan the
image in grayscale.
– Select Black & White (1 bit) to scan the image in black-and-white.
– Select Auto Color Detection to scan the image in color or non-color
based on the automatic judgement and detection of the system.
– Select Complex to scan the image in color, grayscale or non-color
based on the customization.
c) Select a dimension in the Paper Size as your
preview image size.
d) Select a desired resolution in the Resolution
for your image output resolution.
e) If necessary, select "Text Orientation
Recognition" in the Rotate to ensure
the scanned images in a readable
orientation. When it is selected, you
can select the preferred language used
as an identification in the options menu
f) If "Auto-crop" & "Auto-deskew" is selected, the scanner automatically
detects the size of the original image, crops the full scan frame to fit the
image, and removes unwanted black borders after the scan, as well as
corrects the distorted image for proper alignment.
Scan Setup interface to display other interfaces which are helpful for your
scanning processing.
When done, a preview image appears in the Preview window.
Do not forget to put the document back into the document feed tray if the
document feeds through the ADF.