Adjusting The Backlight's Brightness; Resetting The Main Remote Control Unit; Sub Remote Control Unit (Rc-1106) - Denon AVR-2809CI Owner's Manual

Adjusting the Backlight's Brightness

The display's brightness can be adjusted in 5 steps.
(Default: Step 3)
1
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
2
[CHANNEL +] [CHANNEL –]
Press or
The display gets one step brighter when
[–]
The display gets one step darker when
3
[RC SETUP]
Press to complete the setting.

Resetting the Main Remote Control Unit

Learning Function
GResetting button by buttonH
1
[MODE SELECTOR]
Press for the device you want to
reset.
2
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
3
[9] [7] [6]
Press , and , in that order.
The signal transmission indicator flashes twice.
4
Press the button you want to reset twice.
The signal transmission indicator flashes twice.
GResetting by device modeH
1
[MODE SELECTOR]
Press for the device you want to
reset.
2
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
3
[9] [7] [6]
Press , and , in that order.
The signal transmission indicator flashes twice.
4
[MODE SELECTOR]
Press for the device you want to
reset twice.
The signal transmission indicator flashes twice.
System Call Function
1
Press and hold in
The signal transmission indicator flashes twice.
2
[9] [7]
Press ,
The signal transmission indicator flashes twice.
3
[SYSTEM CALL]
Press
.
[+]
is pressed.
is pressed.
4
Press and hold in
The signal transmission indicator flashes twice.
Punch-Through Function
1
[MODE SELECTOR]
Press
reset (TV or SAT/CBL).
2
Press and hold in
The signal transmission indicator flashes twice.
3
[9] [8]
Press ,
The signal transmission indicator flashes twice.
4
Press and hold in
The signal transmission indicator flashes twice.
All Settings
1
Press and hold in
The signal transmission indicator flashes twice.
2
[9] [8]
Press ,
The signal transmission indicator flashes 4 times.
All the settings are restored to their defaults.
[RC SETUP]
for at least 3 seconds.
[8]
and , in that order.
1 2 3
( , or ) you want to reset.
[RC SETUP]
for at least 3 seconds.
for the device you want to
[RC SETUP]
for at least 3 seconds.
[4]
and , in that order.
[RC SETUP]
for at least 3 seconds.
[RC SETUP]
for at least 3 seconds.
[1]
and , in that order.
Sub Remote Control Unit
(RC-1106)
The sub remote control unit (RC-1106) included with the AVR-
2809CI can be used as the exclusive multi-zone remote control
unit.
b The following describes operation for the selected zone. (Use
[ZONE SELECT] to switch zones.)
• Turning the multi-zone power on and off
• Selecting the input source to be played
• Adjusting and temporarily muting the multi-zone volume
• Listening to the tuner (TUNER, XM and SIRIUS)
[FAVORITES DIRECT PLAY]
• Operating an iPod (Note that the
button can only be used with the ASD-3N or ASD-3W.)
[POWER OFF]
[SOURCE SELECT]
[CHANNEL + / –]
[TUNING + / –]
[8], [9]
[2], [1/3]
[REPEAT]
ZONE SELECT Switching the zone to be operated
POWER OFF Power off
POWER ON Power on
SOURCE SELECT Switching the input source
VOLUME + / –
Volume control
CHANNEL + / –
Preset channel + / –
TUNING + / – Tuning + / –
MUTE Muting
SHIFT Switching the memory block
Auto search (cue)
8 9
2 Stop
Play / Pause
1/3
REPEAT 1-track / All -track repeat play
RANDOM 1-track / album shuffle play
b When using a control dock for iPod (ASD-1R or ASD-11R),
[FAVORITES DIRECT PLAY]
cannot be used.
[ZONE SELECT]
[POWER ON]
[VOLUME + / –]
[MUTE]
[SHIFT]
[FAVORITES
DIRECT PLAY]
[RANDOM]