Listening To Music; Viewing Still Pictures Or Videos On The Ipod - Denon AVR-2809CI Owner's Manual

3
To operate using the main remote control unit, set the
remote control unit to the iPod mode.
(vpage 61 "Remote Control Unit Operations")
4
[SEARCH]
Press and hold it down for a 2 seconds or
more to select the display mode.
To switch between modes, press and hold down the button.
When remote mode is active, "Remote" is displayed.
[Selectable mode] Browse mode
Display location Main unit display
Audio file
Playable S
files
Video file S z
Remote
control unit
Active S
(AVR-2809CI)
buttons
iPod
A
1
z : When using an ASD-3N or ASD-3W control dock for iPod.
2
z
: Video may not be output, depending on the combination of
ASD-1R or ASD-11R and iPod.
• With the default settings, the iPod can be used connected to the
VCR (iPod) connector.
• Use the RESTORER mode to expand the low and high frequency
components of compressed audio fi les and achieve a richer sound.
The default setting is "Mode3" (vpage 47).
<ON/STANDBY> [POWER OFF]
• Press or and set the AVR-2809CI's
power to the standby mode before disconnecting the iPod. Also
switch the input source to one to which the menu "iPod Dock" is
not assigned before disconnecting the iPod.
• When using an ASD-3N or ASD-3W control dock for iPod, refer to
the respective manual to operate.

Listening to Music

1
Use ui to select the menu, then press
to select the music fi le to be played.
2
ENTER
Press
Playback starts.
n Stopping playback temporarily
Remote mode
During playback, press
Press again to resume playback.
iPod display
n Fast-forwarding or fast-reversing
S
During playback, either press and hold
1 2
S z
[7]
(to fast-forward).
n
To cue to the beginning of a track
S
During playback, either press
[9]
(to cue to the next track).
S
n
To stop
During playback, either press and hold
n
Playing repeatedly
[CHANNEL –]
Press
[Selectable items] All
MENU : "Input Setup" – "iPod" – "Repeat"
n
Shuffl ing playback
[CHANNEL +]
Press
• When DENON control dock for iPod ASD-1R or ASD-
11R is connected
[Selectable items] Albums Songs
When DENON control dock for iPod ASD-3N or ASD-
•
3W is connected
[Selectable items]
MENU : "Input Setup" – "iPod" – "Shuffl e"
• To check the name of the title, the artist or the album when playing
in browse mode, press
• The folder name and the fi le name can be displayed in browse
mode. Only alphanumeric characters and certain symbols can be
displayed. Any characters that cannot be displayed are replaced with
" . (period)".
• The time (default : 30sec) for which the on-screen display are
displayed can be set at menu "Manual Setup" – "Option Setup"
– "On-Screen Display" – "iPod Information" (vpage 33).
Press uio p
ENTER
or
or p .
ENTER [1]
or .
[6]
(to fast-reverse) or
[8]
(to cue to the previous track) or
ENTER [2]
or press .
.
One OFF
(vpage 40)
.
OFF
ON OFF
(vpage 41)
<STATUS>
.
to return to the original screen.
Viewing Still Pictures or Videos on the
iPod
p
Photo and video data on the iPod can be viewed on the monitor.
Only for iPod equipped with slideshow or video functions. (When
using an ASD-1R or ASD-11R)
1
[SEARCH]
Press and hold to set the Remote mode.
"Remote iPod" is displayed on the AVR-2809CI's display.
2
Watching the iPod's screen, use
"Photos" or "Videos".
3
[ENTER]
Press until the image you want to view is
displayed.
• "TV Out" at the iPod's "Slideshow Settings" or "Video Settings"
must be set to "On" in order to display the iPod's photo data or videos
on the monitor. For details, see the iPod's operating instructions.
• When viewing an iPod video fi le, select "iPod" - "Video" in browse
mode. (When using an ASD-3N or ASD-3W)
NOTE
• Depending on the type of iPod and the software version,
somefunctions may not operate.
• DENON will accept no responsibility whatsoever for any loss of iPod
data.
ui to select