Stereo Playback; Playback In The Pure Direct Mode; Parameter; Adjusting The Parameters - Denon AVR-2809CI Owner's Manual

Stereo Playback

r
Selecting the mode
DIRECT/STEREO
Select by press .
[Selectable items]
:
STEREO
This is the mode for playing in stereo. The tone can be adjusted.
Sound is output from the front left and right speakers and subwoofer.
DIRECT/STEREO
When is pressed, DIRECT mode can be switched
to STEREO mode.

Playback in the PURE DIRECT Mode

This is the mode that recreates the original sound most faithfully,
providing extremely high quality sound.
PURE DIRECT
Press .
PURE DIRECT
• To cancel, press again.
• When in the PURE DIRECT mode, the on-screen display is not
displayed and the display on the main unit is turned off.
• If the HDMI input connector is selected, video outputs are output in
the PURE DIRECT mode.
• The channel level and surround parameters in the PURE DIRECT
mode are the same as in the DIRECT mode.

Parameter

Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
uiop
RESTORER AUDIO DELAY <SURROUND BACK>
STANDARD MENU ENTER RETURN
[ AMP]
DYNAMIC VOLUME
MULTEQ XT
AUDIO DELAY
MENU
RESTORER

Adjusting the parameters

1
MENU
Press
BUTTON
The menu is displayed.
<BUTTON>
b To operate from the main remote control unit, be sure to set the
[BUTTON]
remote control unit to the AMP mode.
2
Press ui
DYNAMIC VOLUME
3
To change the setting:
Press ui
o p
press
b To return to the previous item, press
b Select "Default Yes", then press o to reset to the default
setting.
4
ENTER
Press
MULTEQ XT
n To exit adjustment
MENU
Press during adjustment.
STANDARD
[NIGHT]
ENTER
uiop
RETURN
.
ENTER
to select "Parameter", then press
to select the item you want to change, then
to change the setting.
RETURN
.
to enter the setting.
.