System Call Function; Punch Through Function; Setting The Time The Backlight Stays Lit - Denon AVR-2809CI Owner's Manual

[ AMP]
[SYSTEM CALL]
[POWER ON]
[CHANNEL + −]

System Call Function

This function lets you register a series of operations at a single
button.
For example, the amplifier can be turned on, the input source
selected, the monitor's power turned on, the source device's
power turned on and the play mode set all by pressing a single
button.
Up to 32 signals each can be registered at
3
or ).
Registering
1
[MODE SELECTOR]
Press for the device you want to
register.
2
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
3
[9] [7] [8]
Press , and , in that order.
The signal transmission indicator flashes twice and the system
call registration mode is set.
4
[SYSTEM CALL] 1 2 3
Press ( , or ) at which you want to
register the signals.

5
Signal transmission
Press the buttons you want to register in the same
indicator
sequence as the operations you want to perform.
[ DVD]
The signal transmission indicator lights when a button is
[MODE
pressed.
SELECTOR] Example : Press
[8],[9], Press
[6],[7],
Press
[1], [3],[2]
b The mode can be switched by pressing
b Perform the registration procedure for all the buttons you want to
register.
6
Press and hold in
The signal transmission indicator flashes twice and the setting
is completed.
Calling out
[NUMBER]
1
[AMP]
Press
[RC SETUP]
2
[SYSTEM CALL]
Press
were registered.
The registered signals are transmitted in the registered
sequence.

Punch Through Function

DVD (including BD and CD) or VCR mode buttons can be stored at
unused TV or SAT/CBL mode buttons.
[SYSTEM CALL] 1 2
( ,
For example, when DVD mode buttons are assigned to the TV
mode, the DVD mode operations can be performed while in the
TV mode.
1
[MODE SELECTOR]
Press
punch through (DVD or VCR).
2
[MODE SELECTOR]
Press
punch through (TV or SAT/CBL).
3
Press and hold in
The signal transmission indicator flashes twice.
4
[9] [8]
Press ,
The signal transmission indicator flashes twice and the punch
through setting mode is set.
[POWER ON]
.
↓
[MODE SELECTOR] [DVD]
– .
↓
[ ]
.
1
[MODE SELECTOR]
.
[RC SETUP]
for at least 3 seconds.
, to select "SYSTEM CALL".
1 2 3
( , or ) at which the signals
for the device you want to
for the device you want to
[RC SETUP]
for at least 3 seconds.
[4]
and , in that order.
5
[MODE SELECTOR]
Press for the device you want to
punch through (DVD or VCR).
6
Press the button you want to punch through (1, 2,
6, 7, 8, 9 or 3).
7
[MODE SELECTOR]
Press for the device you want to
punch through (TV or SAT/CBL).
8
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice and the setting
is completed.

Setting the Time the Backlight Stays Lit

1
[RC SETUP]
Press and hold in for at least 3 seconds.
The signal transmission indicator flashes twice.
2
[9] [7] [3]
Press , and , in that order.
The signal transmission indicator flashes twice and the backlight
on time setting mode is set.
3
Set the light on time.
The signal transmission indicator flashes twice.
[1]
[Settable times] : : 5 sec.
[2]
: 10 sec. (Default)
[3]
: 15 sec.
[4]
: 20 sec.
[5]
: 25 sec.