Multi-Zone Settings And Operations With Zone Output - Denon AVR-2809CI Owner's Manual

n Amp Assign mode setting and speakers connected to the various speaker
terminals
Speaker terminal
FRONT
Amp Assign mode
R L
7 .1ch FR FL
• Conduct with this setting during 5.1-channel playback without multi-channel play (Setting 1).
• The surround back channel is output from the speakers connected to the SURR.BACK/AMP ASSIGN
terminals.
Setting 3 :
Making bi-amp connections for the FL and FR channels in the MAIN ZONE
F
and conducting 5.1-channel playback
(switching with other modes not possible)
MAIN ZONE
FL SW C FR
5.1ch
Amp Assign mode:
FL/FR
SL SR
Front A Bi-Amp
Bi-Amp
Front B Bi-Amp
n Amp Assign mode setting and speakers connected to the various speaker
terminals
Speaker terminal
FRONT-A FRONT-B
R L R
Amp Assign mode
Front A Bi-Amp
FR-A FL-A FR-B
Front B Bi-Amp
The Front A or Front B channel for Bi-Amp use is output from the speakers connected to the SURR.BACK/
AMP ASSIGN terminals.
SURROUND BACK /
SURROUND
AMP ASSIGN
CENTER
R L R
C SR SL SBR
SURROUND BACK /
SURROUND
AMP ASSIGN
CENTER
L R L R
FR
FL-A/FR-A Bi-Amp
connection
FL-B C SR SL
FR
FL-B/FR-B Bi-Amp
connection
Remote
Multi-zone Settings and Operations with Zone
control unit
Output
Prepare power amplifiers for ZONE2 and ZONE3.
L
Connectors for audio output
SBL
ZONE2 ZONE2 PRE OUT
ZONE3 ZONE3 PRE OUT
MAIN ZONE (7.1-channel system)
Monitor
Blu-ray Disc player /
AVR-2809CI
DVD player
Input
Remote
control unit
• When only using one speaker for ZONE2 or ZONE3, set to "Mono" . In this case, the ZONE2 (ZONE3)
monaural output is output from the ZONE2 (ZONE3) pre-out L and R connectors, so connect as desired.
• Separate power amplifiers are needed for ZONE2 and ZONE3.
L
FL
FL
Audio signals Connectors for video output
Stereo ZONE2 VIDEO OUT
Stereo
ZONE2
Monitor
Power amplifier
ZONE2
video output
ZONE2
audio output
ZONE3
Power amplifier
ZONE3 audio output
: Multi-zone video cable
: Multi-zone audio cable
–