Input Mode; Control Unit - Denon AVR-2809CI Owner's Manual

Resolution
Make settings for resolution of HDMI video output signal.
[Input source] DVD HDP TV/CBL SAT
V.AUX
[Selectable items]
Auto
: Detect monitor panel resolution and automatically set
output resolution.
480p/576p
: Output at 480p/576p resolution.
1080i
: Output at 1080i resolution.
720p
: Output at 720p resolution.
1080p
: Output at 1080p resolution.
This can be set when "i/p Scaler" is set to "A to H".
NOTE
• It is not possible to convert "1080i" signals into "720p" format.
• It is not possible to convert "720p" signals into "1080i" format.
Progressive Mode
Select optimum progressive mode for video material.
[Input source] DVD HDP TV/CBL
V.AUX
[Selectable items]
Auto
: Automatically detect video material type.
Video1
: Select mode suitable for video playback.
Video2
: Select mode suitable for video and 30-frame film material
playback.
This can be set when "i/p Scaler" is set to "A to H".

For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 20).
Aspect
This sets the aspect ratio when outputting 480i/576i or 480p/576p
input signals from the HDMI output connector.
VCR DVR
[Input source] DVD HDP TV/CBL
[Selectable items]
Full
: Output at 16:9 aspect ratio.
Normal
: Output at 4:3 aspect ratio.
This can be set when "i/p Scaler" is set to "A to H".
g Input Mode
Make input mode and decode mode settings for this source.
The selectable input modes depend on the input source and
"Assign" setting (vpage 38).

Input Mode

Set the input mode for this source.
[Input source]
SAT VCR DVR
[Selectable items]
Analog
: Play only signals from analog input.
EXT. IN
: Play only signals from EXT. IN input.
[Input source]
[Selectable items]
Auto
: Automatically detect input signal and perform playback.
EXT. IN
: Play only signals from EXT. IN input.
SAT VCR DVR
V.AUX
TUNER PHONO
XM
[Input source] CD DVD HDP TV/CBL
V.AUX SIRIUS
[Selectable items]
Auto
: Automatically detect input signal and perform playback.
z1
HDMI
: Play only signals from HDMI input. (Excluding CD and
SIRIUS)
z2 : Play only signals from digital input.
Digital
Analog
: Play only signals from analog input.
EXT. IN
: Play only signals from EXT. IN input.
z1: This can be selected for input sources for which the menu
"Assign" setting is set to "HDMI In".
z2: This can be selected for input sources for which the menu
"Assign" setting is set to "Digital In" (vpage 38).
• When a digital signal is properly input, the "
the display. If the " " indicator does not light, check the digital
input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to "EXT.
IN".
Operating from the main unit or main remote

control unit

INPUT MODE
Press .
Each time you press the button, the input mode display will change.
z1
Auto HDMI
EXT. IN Analog
z1: This can be selected for input sources for which the menu
"Assign" setting is set to "HDMI In".
z2: This can be selected for input sources for which the menu
"Assign" setting is set to "Digital In" (vpage 38).
SAT VCR DVR
" indicator lights on
z2
Digital