Connecting The Power Cord; Once Connections Are Completed; Menu Operations; Operations - Denon AVR-2809CI Owner's Manual

Connecting the Power Cord

Wait until all connections have been completed before connecting the
power cord.
Connection to the AC outlets
• These outlets supply power to external audio
equipment.
• The power supplied from these outlets turns
on and off together with the set's power
switch.
• Audio equipment
consumption of 120 W (1 A) can be
connected.
Power cord
(supplied)
NOTE
• Insert the AC plugs securely. Incomplete connections could cause
noise.
• Only use the AC outlets to plug in audio equipment. Do not use
them as power supplies for hairdryers or anything other than audio
equipment.
Once Connections are
Completed
Turning the Power On
(vpage 50)

Menu Operations

Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
with a total power
To household
power outlet
(AC 120 V, 60 Hz)
[ AMP]
MENU
uiop
BUTTON
<BUTTON>
[BUTTON]
uiop
MENU ENTER RETURN
ENTER
RETURN
With the AVR-2809CI, settings and operations for most functions can
be performed by operating while looking at the menus displayed on
the monitor screen.

Operations

The same operation is possible on the main unit or main remote
control unit.
1
MENU
Press .
The menu is displayed.
b To operate from the main remote control unit, be sure to set the
remote control unit to the AMP mode.
2
ui
Press to select the item you want to set, then
ENTER
press .
3
ui
Press again to select the item you want to set,
ENTER
then press .
4
To change the setting:
ui
Press to select the item you want to change, then
press o p to change the setting.
RETURN
b To return to the previous item, press
b Select "Default Yes", then press o to reset to the default
setting.
5
ENTER
Press to enter the setting.
6
MENU
Press to fi nish.
MENU
When is pressed, the settings made up to that point are entered
and the settings menu screen turns off.
.
0