Playing The Ipod; Setting The Ipod Assignment; Listening To Music - Denon DRA-700AE Operating Instructions Manual

ENGLISH
Operation
FUNCTION <MEMORY>
<ON/STANDBY> STATUS
<MODE>
FUNCTION
MENU
ENTER
STATUS
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Playing the iPod

<SELECT>
The music recorded on the iPod can be played when using a Control
Dock for iPod (ASD-1R, sold separately). The iPod can be controlled
using the buttons on the main unit and the remote control unit.
With the iPod, non-copyrighted contents and contents that may be
legally reproduced or played may be reproduced and played by
individuals for their personal use. Violating copyrights is prohibited
by law.
MENU
ENTER

Setting the iPod Assignment

It is possible to assign the Control Dock for iPod's (ASD-1R, sold
[POWER OFF] separately) audio and video signals to any input terminals on the DRA-
700AE/700AEDAB and play them.
1 MENU
Press
2 < SELECT >
Use
terminals.
None:
This is the factory default setting.
DVD, V.A, VCR, CDR, CD:
When using a Control Dock for iPod, it is possible to connect with
the audio input terminal of the assigned function.
3
ENTER
Press
[D H F G]
• The optional standard Control Dock for iPod is DENON ASD-1R sold
separately.
• To assign to a different function after a function has already been
assigned, switch to a function other than the one that is assigned
then repeat the procedure.
®
iPod is a trademark of Apple Computer, Inc., registered
in the U.S. and other countries.
.
[F F G G ]
or press to select the input
.
21
ENGLISH
NOTE:
• DENON will accept no responsibility whatsoever for loss or
damage of data on an iPod occurring when the iPod is used
connected to the DRA-700AE/700AEDAB.
• Some of the functions may not operate, depending on the type
of iPod and the software version.

Listening to music

1
Connect the DRA-700AE/700AEDAB and iPod using
the Control Dock for iPod (ASD-1R) (
2
Assign the input terminal at "Setting the iPod
Assignment".
3
FUNCTION
Use to select the function assigned in step 2.
• Display "Remote iPod" on the main unit's display.
R e m o t e i P o d
If the screens above are not displayed, the iPod may not be
properly connected. Check the connections and settings.
4 < SELECT >
MENU
Operate using ,
ENTER
while watching the iPod's screen.
• The optional standard Control Dock for iPod is DENON ASD-1R sold
separately.
Operation
page 9).
[D D H H F F G G ]
, and