Dexcom stelo Manual page 71

Remove while using sensor
To remove old sensors from the Bluetooth connections list while you're wearing a
sensor, follow the above steps and keep these tips in mind:
All Stelo sensors are listed as not connected, even the current one. The current
l
sensor's status changes to connected during the few seconds every 5 minutes
when it's sending your sensor reading to your smartphone. If you watch the list for
up to 5 minutes, you'll see which sensor is the current one.
Don't worry if you remove the current sensor. Within 15 minutes, the sensor will
l
send your next sensor reading to your smartphone and the sensor will reappear in
the Bluetooth connections list. (If you use an iPhone, it will prompt you to re-pair
the sensor — no pairing code needed. Android phones do this automatically).
11 • Next Sensor Session | Stelo Glucose Biosensor User Guide 65