D-Link DVG-G1402S User Manual page 42

DVG-G1402S User's Manual
Using the Configuration Utility (continued)
Call Waiting Alert Tone:
IPSec Passthrough/PPTP
WAN Port Speed Selection:
D-Link Systems, Inc.
Advanced > NAT > Misc (continued)
This is used to enable or disable the call waiting alert tone.
T.38:
This is used to enable or disable the t.38 protocol.T.38 is a standard
for sending FAX across IP networks.
MTU Size:
Enter the MTU (Maximum Transmission Unit). The default setting
(for most cable providers) is 1500. Most DSL providers use 1492.
UPnP:
Select to enable or disable UPnP™ (Universal Plug and Play).
The device supports VPN (Virtual Private Network) pass-through
Passthrough:
for both PPTP (Point-to-Point Tunneling Protocol) and IPSec (IP
Security). Once IPSec or PPTP pass-through is enabled, there is
no need to open up virtual services. Multiple VPN connections can
be made through the device. This is useful when you have many
VPN clients on the local area network.
PPPoE Passthrough:
Select to enable or disable PPPoE passthrough.
Which allow user to select their WAN port speed of the device:
100Mbps Full/Half, 10Mbps Full/Half or Auto.
Apply:
Click Apply to save your settings.
Using the Configuration Utility
42