Dhcp Settings - D-Link DVG-G1402S User Manual

DVG-G1402S User's Manual
Using the Configuration Utility (continued)
D-Link Systems, Inc.
Name:
Enter a name for your DVG-G1402S unit (optional).
State:
Select Enabled or Disabled. If you disable DHCP, you must
manually enter the IP settings on all your other network devices.
Start IP Address:
Enter the starting IP address of the IP address range you want to
assign to your network devices.
Gateway:
Enter the default gateway you want to assign to your devices. This
is usually the (LAN) IP address of the DVG-G1402S.
IP Range:
Enter the number of networking devices that will receive IP
addresses from the DVG-G1402S.
Leased Time:
Enter the lease time. Enter 0 for no time limit.
Apply:
Click Apply to save your settings.
Home > DHCP
Using the Configuration Utility
28