D-Link DVG-G1402S User Manual page 26

DVG-G1402S User's Manual
Using the Configuration Utility (continued)
Primary/Secondary DNS Address:
Note: You must disable or uninstall the PPPoE software (Enternet 300, WinPoet, etc) from your
computer. You do not need the software since the router is authenticating to your DSL provider. The
software to connect to your service will not work through the router. Simply connect to the Internet
by opening your web browser.
D-Link Systems, Inc.
User Name:
Enter your PPPoE user name.
Password:
Enter your PPPoE password.
Retype Password:
Enter your PPPoE password again.
You may enter the DNS if supplied by your ISP. Leave blank if you
do not know or were supplied with DNS server IP addresses.
PPPoE Status:
The status of your connect will be displayed here.
Connect/Disconnect:
Click Connect to manually connect to your DSL service. You may
manually disconnect from your service by clicking Disconnect.
Apply: Click Apply to save your settings.
Home > WAN > PPPoE
Using the Configuration Utility
26