D-Link DVG-G1402S User Manual page 15

DVG-G1402S User's Manual
Using the Configuration Utility (continued)
Select a channel. For best results, use
1, 6, or 11. Enter the SSID, or Service
Set Identifier, which is the workgroup
name of your Wireless Network. All
devices must all have the same SSID to
communicate on the wireless network. The
SSID can be up to 32 characters and is
case-sensitive.
Click Next.
Select the Authentication Type:
None, WEP, or WPA-PSK.
Click Next.
If you selected WEP, enter the Encryption
Type (Hex or ASCII), the encryption level
(64, 128, or 152-bit), and the WEP key.
Click Next.
If you selected WPA-PSK, enter the
Passphrase. The passphrase must
be between 8 and 63 characters.
Click Next.
D-Link Systems, Inc.
Using the Configuration Utility
15