System Log Server - D-Link DGS-3212SR User Manual

System Log Server

The switch can send Syslog messages to up to four designated servers. Use the System Log Server
The parameters configured for adding and editing System Log Server settings are the same. See the table below
for a description.
The following parameters can be set:
Parameter
Index
Server IP
Severity
Facility
D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
Figure 13-1. System Log Servers
Figure 13-2. System Log Servers − Add
Description
Syslog server settings index (1-4).
The IP address of the Syslog server.
This drop-down menu allows you to select the level of messages that will
be sent. The options are Warning, Informational, and All.
Some of the operating system daemons and processes have been
assigned Facility values. Processes and daemons that have not been
explicitly assigned a Facility may use any of the "local use" facilities or they
73
Section 13