Installing The Switch In A Rack - D-Link DGS-3212SR User Manual

Installing the Switch in a Rack

You can install the switch in most standard 19-inch (48.3-cm) racks. Refer to the illustrations below.
1. Use the supplied screws to attach a mounting bracket to each side of the switch.
2. Align the holes in the mounting bracket with the holes in the rack.
3. Insert and tighten two screws through each of the mounting brackets.
D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
Figure 2-2. Attach mounting brackets
10