Vlan Configuration - D-Link DGS-3212SR User Manual
High-density layer 2 modular gigabit ethernet switch
Hide thumbs
Also See for DGS-3212SR:
- Command line interface reference manual (209 pages) ,
- Command line interface reference manual (269 pages)
Table of Contents
Advertisement
D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
Section 5
VLAN Configuration
The first half of this section describes how to use the web manager to configure VLANs in the switch. This is
followed by a review of some of the basic concepts of VLANs in an Ethernet switching environment. For a
detailed list of CLI commands associated with VLAN management, please read the CLI reference guide.
To create or modify an 802.1Q VLAN:
In the Configuration folder, open the VLAN folder and click the Static VLAN Entry link to open the following
menu:
Figure 5-1. 802.1Q Static VLANs
The 802.1Q Static VLANs menu lists all previously configured VLANs by VLAN ID and name. To delete an
existing 802.1Q VLAN, click the corresponding Delete button.
To create a new 802.1Q VLAN, click the Add button in the Static VLANs menu. A new menu appears, use this
to configure the port settings and to assign a unique name and number to the new VLAN. See the table below for
a description of the parameters in the new menu.
Figure 5-2. 802.1Q Static VLANs Entry Settings – Add
38
Advertisement
Table of Contents
