Forwarding And Filtering - D-Link DGS-3212SR User Manual

Forwarding and Filtering

Static Unicast Forwarding
Open the Forwarding & Filtering folder and click on the Unicast Forwarding link. This will open the Setup
Static Unicast Forwarding Table, as shown below.
To add an entry, define the following parameters in the Add an Entry field:
Parameter
VLAN ID
MAC Address
Allowed to Go to
Unit
Port
Click on the Add/Modify button to add a unicast MAC address to the switch's forwarding table, or to modify a
previous entry.
Static Multicast Forwarding
The following figure and table describe how to set up Multicast forwarding on the switch. Open the Forwarding
& Filtering folder and click on the Multicast Forwarding link to see the entry screen below:
D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
Figure 8-1. Static Unicast Forwarding Setup
Description
The VLAN ID number of the VLAN on which the above Unicast MAC
address resides.
The MAC address to which packets will be statically forwarded. This must
be a unicast MAC address.
Allows the designation of the module on which the above MAC address
resides.
Choose the port on which the MAC address resides. Selecting Port 0
means no ports are allowed.
53
Section 8