Snmp Engine Id - D-Link DGS-3212SR User Manual

Community String /
SNMP V3 User Name

SNMP Engine ID

The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric string used to
identify the SNMP engine on the switch.
To display the switch's SNMP Engine ID, open the Management folder, and then the SNMPV3 folder. Next,
click on the SNMP Engine ID link. This will open the SNMP Engine ID Configuration page, as shown below.
To change the Engine ID, type the new Engine ID in the space provided and click the Apply button.
D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
Type in the community string or SNMP V3 user name as appropriate.
Figure 18-12. SNMP Engine ID Configuration
98