Basic Setup - D-Link DGS-3212SR User Manual

Web Pages
When you connect to the management mode of the switch with a web browser, a login screen is displayed. Enter
a user name and password to access the switch's management mode.
Below is a list and description of the main folders available in the web interface:
Configuration folder: includes menus for port configuration, port lock, bandwidth control, link aggregation,
port mirroring, VLANs configuration, Spanning Tree Protocol setup, forwarding & filtering configuration,
Quality of Service, broadcast/multicast storm controls (Traffic Control), IGMP snooping, static router ports
setup, SysLog server setup, MAC notification, SNTP settings, and the access profile table. This also contains
the Advanced Settings menu which is used to configure miscellaneous settings such as for the serial port,
MAC address aging time, and to enable/disable the following: RMON, IGMP snooping, Telnet and web
management access, traffic segmentation, multicast router, server MAC checking, and 802.1x. The Switch
Information page is used to enter system contact and physical location information and lists basic information
such as the switch's MAC address, current firmware version, and the modules installed.
Security: contains 802.1x settings including Radius server information, PAE setup and security management
IP station setup.
Management: contains menus for establishing the switch IP settings, user accounts configuration and SNMP
setup including SNMP v.3 configuration.
Monitoring: includes menus for monitoring switch performance monitors, MAC address table information,
router port information, IGMP Snooping information, and 802.1x related information.
Maintenance: contains menus for upgrading firmware and saving configuration files (TFTP Services),
saving configuration changes, resetting and rebooting the switch, Ping test, and logging out of the web
manager.
Help: contains a link to the Manual.

Basic Setup

The subsections below describe how to change some of the basic settings for the switch such as changing IP
settings and assigning user names and passwords for management access privileges, as well as how to save the
changes and restart the switch.
D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
NOTICE:
Any changes made to the switch configuration during the current
session must be saved in the Save Changes web menu (explained below) or use
the command line interface (CLI) command save.
NOTE: Be sure to configure the user name and password in the User
Accounts menu before connecting the switch to the greater network.
24