Snmp; Snmp User Table - D-Link DGS-3212SR User Manual

D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
Section 18

SNMP

The DGS-3212SR incorporates a flexible SNMP management for the switching environment. SNMP
management can be customized to suit the needs of the networks and the preferences of the network
administrator. Use the SNMP V3 menus to select the SNMP version used for specific tasks.
The DGS-3212SR supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. The
SNMP version used to monitor and control the switch can be specified by the administrator. The three versions
of SNMP vary in the level of security provided between the management station and the network device.
SNMP settings are configured using the menus located on the SNMP V3 folder of the web manager.
Workstations on the network that are allowed SNMP privileged access to the switch can be restricted with the
Management Station IP Address menu.

SNMP User Table

The SNMP User Table displays all of the SNMP User's currently configured on the switch.
Open the Management folder and then the SNMPV3 folder. Finally click on the SNMP User Table link. This
will open the SNMP User Table, as shown below.
Figure 18-1. SNMP User Table
To delete an existing SNMP User Table entry, click on the X icon below the Delete heading corresponding to the
entry you want to delete.
To display the detailed entry for a given user, click on the blue User Name. This will open the SNMP User
Table Display page, as shown below.
Figure 18-2. SNMP User Table Display
91