D-Link DGS-3212SR User Manual page 98

•
ReAuth [Disabled] – Determines whether regular reauthentication will take place on this port.
The following parameters can be set:
Parameter
Unit
From/To
AdmDir
PortControl
TxPeriod
QuietPeriod
SuppTimeout
ServerTimeout
MaxReq
ReAuthPeriod
ReAuth
D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
Description
Allows you to specify a switch in a switch stack using that switch's Unit ID.
15 indicates a switch in standalone mode.
A consecutive group of ports may be configured starting with the selected
port.
From the pull-down menu, select whether a controlled Port that is
unauthorized will exert control over communication in both receiving and
transmitting directions, or just the receiving direction.
From the pull-down menu, select Force Authorized, Force Unauthorized,
or Auto − Force Authorized forces the Authenticator of the port to
become Authorized. Force Unauthorized forces the port to become
Unauthorized.
Select the time to wait for a response from a supplicant (user) to send EAP
Request/Identity packets.
Select the time interval between authentication failure and the start of a
new authentication attempt.
Select the time to wait for a response from a supplicant (user) for all EAP
packets, except for the Request/Identity packets.
Select the length of time to wait for a response from a Radius server.
Select the maximum number of times to retry sending packets to the
supplicant.
Select the time interval between successive re-authentications.
Enable or disable reauthentication.
88