Introduction - ADLINK Technology COM Express DB30 x86 User Manual

ADLINK Technology Inc.

1. Introduction

The DB30 x86 Debug board is used for COM Express modules during a project's development stage. It includes the following features
Interface to SPI Flash for BIOS update

Interface to EC for Embedded Controller (EC) update

Power and Reset Buttons

Status LEDs and Test Point for Power Button, Reset Button, CB__PWROK, CB_RESET#, SLP_S3#, SLP_S4#, SLP_S5#, EC_STATUS

Port 80 Decoding Interface with hexadecimal LED display for Power on and Self-test (POST) via I

Caution: The DB30 x86 Debug board can only be used on products that have the appropriate FFC debug connector for this usage.
Page 8 copyright © 2023 ADLINK Technology Inc.
DB30 x86 User's Guide
C interface
2