Safety Instructions; General Safety Instructions; Intended Use - flamco Sideflow Clean Pro Operating Instructions Manual

2. Safety instructions

The Sideflow Clean Pro device was manufactured in compliance with applicable legal
regulations and in accordance with recognised safety rules and regulations.
The device corresponds to the state of the art technology at the time of its initial
commissioning. However, dangers can arise for the operator, for other persons, for
the device itself and other material assets.
A NOTICE
To ensure safe use of the device, please observe the safety instructions
in this section and the warnings in other sections of this operating
manual.

2.1. General safety instructions

The device may only be installed by qualified personnel who have received safety
training.
operated and maintained.
Persons involved in commissioning, operation, maintenance, repair, dismantling and
Disposal of the device must read the operating instructions and in particular
have read and understood the safety instructions.
The operating instructions must be kept carefully and made available to persons who
or work on the device, are available at all times.

2.2. Intended Use

In order to use the device as intended, it is necessary to be familiar with the operating
instructions and to comply with all the information, maintenance and inspection
regulations contained therein.
DANGER
Danger to life or risk of serious injury
Mechanical and electrical hazards occur when operating the device. To
prevent personal injury due to these hazards, you must only use the
device as intended.
The device may only be used as intended as follows:
For the initial filling of heating systems and cooling systems with water and for the
treatment of water in heating systems and cooling systems using the bypass process.
The following additional provisions apply:
8
We reserve the right to change the design and technical specifications of our products.