Setting Date And Time - flamco Sideflow Clean Pro Operating Instructions Manual

The following operating parameters can be set:
Temperature Max.
Pressure Max.
Pressure Min.
Flow Max
Flow Min
The minimum operating pressure should be 1.2 bar to ensure optimal operation of the
Sideflow Clean Pro. If the limit values are exceeded or not met, an error is triggered and
the pump is deactivated.
4.4.5.

Setting date and time

Figure 4.4.5. Date & Time
On this page you can set either the time or the date by tapping on the respective field.
> Sideflow Clean Pro Operation
0 - 80 °C
0 - 8 bar
0 - 5 bar
30 - 85 l/min
15 - 40 l/min
Sideflow Clean Pro
25