Advertisement
8. Dismantling and disposal
CAUTION
The device may only be dismantled by authorized and qualified
personnel who are familiar with the hazards involved.
A NOTICE
Regulations and laws
Observe local regulations and laws regarding the disposal of
environmentally harmful substances.
•
The device may only be dismantled by authorized personnel.
•
Please observe the safety instructions in the operating instructions in the section
Safety instructions" on page
•
Do not touch any live components.
•
Wear appropriate personal protective equipment.
•
Only use suitable and tested lifting equipment.
Injuries can be caused by:
•
Live components
•
Heavy components that fall down after being loosened
•
Sharp edges
8.1. Specialist personnel
The specialist staff must take the following points into account:
•
Please observe the safety instructions in this operating manual.
•
Wear appropriate personal protective equipment.
•
Only use suitable and tested lifting equipment.
•
Use suitable means of transport and keep transport routes clear.
•
Before starting work, switch off the device and disconnect it from the power supply.
8.2. Removal
To disassemble the device, proceed as follows:
1.
1 Turn off the device and disconnect the power supply from the mains.
2.
Discharge energy storage devices such as springs or capacitors, if present.
3.
Make sure that any residual pressure has been released.
4.
Disassemble the device into its components using suitable tools.
> Dismantling and disposal
8th.
Sideflow Clean Pro
"2
47
Advertisement
Need help?
Do you have a question about the Sideflow Clean Pro and is the answer not in the manual?
Questions and answers