Settings - flamco Sideflow Clean Pro Operating Instructions Manual

If the Sideflow Clean Pro is active, the following data appears when you click on
System Status:
• Operating mode: continuous or normal operation.
• Pump: Current pump performance in %
• Flow rate: Current flow rate of the Sideflow Clean Pro depending on the set pump
power
• Filter: Current capacity of the filter (0% = new; 100% = used)
• Pressure: Heating water pressure at the inlet of the Sideflow Clean Pro

4.4. Settings

Figure 4.4 Setting remote - OFF
In the settings submenu, the operating mode can be configured, the operating
parameters as well as the date and time can be set and the manual pump test can be
started.
During the manual pump test, the pump always runs at 100%, i.e. maximum power.
In order to test the pump for functionality, the system must be switched on on the
home page.
> Sideflow Clean Pro Operation
Sideflow Clean Pro
21