So, Hello - Circontrol Wallbox eVolve Rapid Series Installation & User Manual

So, hello!

This manual provides commissioning and use instructions information about
Wallbox eVolve Rapid, which has been designed and tested to allow electric
vehicle charging, specified in IEC 61851.
This document has different sections such as step-by-step installation
procedure and technical data.
THE FOLLOWING SYMBOLS ARE USED FOR IMPORTANT
SAFETY INFORMATION IN THIS DOCUMENT
ELECTRIC RISK
Take precautions to make the electrical connection inside the
unit. Unit must be disconnected from any power source during
commissioning.
ATTENTION!
Indicates that the damage to property can occur if appropiate
precautions are not taken.
• Compliant with IEC 61851; Electric vehicle conductive charging system
(IEC 61851-1 and IEC 61851-23).
• Compliant with IEC 62196; Plugs, sockets-outlets, vehicle connectors
and vehicle inlets- Conductive charging of electric vehicles
IEC 62196-2 and IEC 62196-3).
• Directives: 2014/53/EU, Radio and Telecommunication Terminal
equipment; 2014/30/EU, Electromagnetic Compatibility (EMC); 2014/35/
EU, Low Voltage.
• Compliant with IEC 61851-24, Digital communication between a DC
EV charging station and an electric vehicle for control of DC charging.
Meets the CCS specification, DIN SPEC 70121. ISO 15118 ready.
• Compliant with RoHS 2011/65/EU-2017/2102, Restriction of Hazardous
Substances.
(IEC 62196-1,
03