Step 12. On the flywheel remove the four
shipping blocks by unscrewing the screws.
Discard the shipping blocks and shipping
block screws.
BlADE/BlADE holDER InSTAllATIon
Step 13. Using the screws from the pack,
attach each blade/blade holder assembly to
the motor.
Using the screwdriver, tighten securely by
hand only.
Your Brescia fan is equipped with a
flywheel that allows for both 4 and 5
blade installation. The screw holes
surrounded by squares are for 4 blade
installation, while the screw holes in
circles are for 5 blade installation as
shown above.
8
REmovE ShIppIng BloCKS
ShIppIng
BloCKS
BlADE
holDER
SCREwS