Blade Installation; Remove Shipping Blocks - Casablanca C CasablancaCAPISTRANO Owner's Manual

Step 10. Attach each blade to a blade
holder securing it with the four blade
screws provided.
Using the screwdriver, tighten securely
by hand only.
Step 11. On the flywheel remove the five
shipping blocks by unscrewing the screws.
Set these screws aside for installing the
blades in Step 12.
Discard the five shipping blocks.
Note: Save these five screws, they
will be used in Step 12!
Step 12. Using the five screws removed in
Step 11, and the five additional screws from
the pack, attach each blade/blade holder as-
sembly to the motor.
Using the screwdriver, tighten securely by
hand only.

BLADE INSTALLATION

BLADE SCREW
(4 PER BLADE)

REMOVE SHIPPING BLOCKS

SHIPPING
BLOCKS
BLADE/BLADE HOLDER INSTALLATION
C
APISTRANO
BLADE
HOLDER
™
Casablanca
BLADE
7