Setting Network
■Displaying the Network Configuration Screen
1
Turn on the computer and projector.
2
Launch a web browser, enter "http://192.168.254.254" in the address bar, and press
the Enter key.
The password input screen appears.
The supported web browsers is Microsoft Internet Explorer 6 or later.
3
In the password input screen, enter "root" for [User name] and "system" for [Password]
and click the [OK] button.
The projector network configuration screen appears on the web browser.
The following information is displayed.
[Projector name]:
[MAC address]:
[IP address]:
[Power Status]:
[Lamp Time Normal Mode]:The total lamp used time in its normal mode
[Lamp Time Quiet Mode]: The total lamp used time in its quiet mode
[Lamp Time Converted]:
[Filter Time]:
Click the [Settings] button to display the menu screen.
The name of the projector on the network
The MAC address of the projector
The IP address of the projector
The power status of the projector
The total lamp used time (converted value)
The total filter used time
106