Selecting Screen Aspect And Aspect; Selecting Screen Aspect - Canon RealIS WUX10 User Manual

Selecting Screen Aspect and Aspect

Select an optimum aspect ratio of the projecting image (screen aspect) or an optimum
screen mode (aspect) according to the aspect ratio of the screen, type of input image
signal and so on for the projection making best use of the screen size.
• [Screen aspect]: Select the same aspect ratio with your screen.
• [Aspect]: Select [Auto] unless the type of input signal is [VIDEO].
You may need to change the setting depending on the resolution of the computer. If the
image is not projected with a desired aspect ratio, see "Relationship between Aspect and
Screen Aspect" in Appendix on page 125.

Selecting Screen Aspect

Select the aspect ratio of projecting image to the aspect ratio of the screen.
Perform the following steps to select the aspect ratio of the projecting image.
1
Press the MENU button to display a menu window.
Remote control
2
Use [<] / [>] to select the [Display settings] tab.
Remote control
3
Select [Screen aspect] with [ ] / [ ], and then press the OK button.
Remote control
Top control
Top control
Top control
55