Connecting To Dvi Monitor Output Terminal (Digital Connection) - Canon RealIS WUX10 User Manual

Connecting the Projector
BNC cable (Input signal type: [ANALOG PC-2] - P47)
Computer
mini D-sub 15-pin – BNC
Terminal Convert Cable
(commercial item)
Monitor output
terminal
(mini D-sub 15-pin)
Audio output terminal
(AUDIO OUT)
• It cannot project a signal whose dot clock is 170MHz or higher.
• Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
turns down the sound.

■Connecting to DVI Monitor Output Terminal (digital connection)

DVI cable (Input signal type: [DIGITAL PC] - P47)
Computer
Monitor output
terminal
(DVI terminal)
Audio output terminal
(AUDIO OUT)
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
turns down the sound.
Commercial BNC cable
To input a corresponding audio signal:
Commercial audio cable
DVI digital cable (LV-CA29, option)
To input a corresponding
audio signal:
Commercial audio cable
36
mini D-sub 15-pin – BNC
Terminal Convert Cable
(commercial item)
To ANALOG PC-1/
DVI-I IN
Projector
To ANALOG PC-2/
COMPONENT IN
To AUDIO IN
Projector
To AUDIO IN