Adjusting Input Signal (Analog Pc) - Tracking; Adjust Input Signal (Analog Pc) - Horizontal Position - Canon RealIS WUX10 User Manual

Setting Display Status
Adjusting Input Signal (ANALOG PC) –
Tracking
[Input signal settings] - [Tracking]
HDMI
DIGITAL PC
ANALOG PC
Input signal settings
Tracking
You can fine-tune the timing for generating
an image from the image signal.
Adjusts the tracking when the image dis-
torts or flickers.
Use [<] / [>] to select a value.
When you have completed the adjust-
ment, press the MENU button.
• Perform this adjustment if the [AUTO
PC] function (P50) cannot adjust the
project image correctly.
• You can make adjustment either for
[ANALOG PC-1] or [ANALOG PC-2].
Adjust Input Signal (ANALOG PC) – Hori-
zontal position
[Input signal settings] - [Horizontal position]
COMPONENT
VIDEO
Display settings
You can adjust the horizontal position of
the screen when the projected image is
shifted in the horizontal direction.
Use [<] / [>] to select a value. As the value
increases, the screen moves to the left.
When you have completed the adjust-
ment, press the MENU button.
• Perform this adjustment if the [AUTO
• You can make adjustment either for
76
HDMI
DIGITAL PC
ANALOG PC
Input signal settings
Horizontal position
PC] function (P50) cannot adjust the
project image correctly.
[ANALOG PC-1] or [ANALOG PC-2].
COMPONENT
VIDEO
Display settings