Placing On A Level Place - Canon RealIS WUX10 User Manual

Canon realis wux10: user guide
Hide thumbs Also See for RealIS WUX10:
Table of Contents

Advertisement

Setting Up the Projector

■Placing on a Level Place

Be sure to keep the projector as horizontal as possible.
If you need to point the projector up (for example, when the screen is placed on a higher
position), follow the instruction given in "When Pointing the Projector Up" on the following
page.
• Adjust the tilt of the projecting image using the rear adjustable foot.
Make sure that the installation position is free
from any obstacle that may block the exhaust
vent on the right side of the projector and the air
intake vent on the bottom of the projector.
Ceiling Mounting or Rear Projection
You can mount the projector on the ceiling (Ceiling mounted) with it turned up side
down or place it behind the screen (Rear) if you use a translucent screen. For ceil-
ing mounting or rear projection, you have to invert the projected image. (P81)
Ceiling Mounting
Rear Projection
32

Advertisement

Table of Contents
loading

This manual is also suitable for:

3288b002Wux10

Table of Contents