Canon RealIS WUX10 User Manual page 110

Setting Network
5
If you want to monitor the projector, click [SNMP], enter appropriate values in the fol-
lowing field, and click the [OK] button.
Select one of the following four SNMP version in [SNMP]. Select [OFF] if you donÅft
want to monitor the projector.
(The factory default: [OFF])
[V1], [V2c], [V3 (MD5)], [V3 (DES, MD5)]
Setting items:
[Receive community]:
[Password]:
[Confirm password]:
[SNMP trap]:
[Trap IP address]:
[Trap community]:
What is the SNMP Agent Function?
This projector supports the SNMP (Simple Network Management Protocol) agent
function that monitors the status of the projector. SNMP consists of the manager (a
monitoring tool, your PC) and agent (a monitored target, the projector).
The information exchange group via SNMP is called "a community." The message
which tells the status of the agent is called "a SNMP trap."
This projector has the following SNMP traps:
• coldStart:
• warmStart:
• authentication Failure:
• faultyLamp:
• faultyPowerSupply:
• temperatureAbnormality: it tells that a temperature-related error was occurred.
• lampStatusChange:
• faultyCoolingFan:
• faultyLampCover:
The name of the community (user)
The password for the community setting
The password for confirmation
Conditions for sending the SNMP trap
The IP address to which the SNMP trap is sent
The name of the community (user) to which the SNMP
trap is sent
it tells the SNMP agent is under initialization.
it tells the SNMP agent is under reset (at the SNMP ver-
sion upgrade).
it tells that it failed the SNMP authentication.
it tells that a lamp-related error was occurred.
it tells that a power supply-related error was occurred.
it tells that the status of the lamp used time was
changed.
it tells that a cooling fan-related error was occurred.
it tells that a lamp cover-related error was occurred.
110