Selecting An Input Signal Type (Analog Pc); Selecting An Input Signal Type (Video) - Canon RealIS WUX10 User Manual

Setting Display Status
Selecting an Input Signal Type (ANALOG
PC)
[Input signal select]
HDMI
DIGITAL PC
ANALOG PC
Input signal select
You can select a proper resolution if auto
PC adjustment function (P50) cannot
project a correct image from a computer.
Press the OK button to accept your setting
and then press the MENU button.
Select an input signal corresponding to
the resolution of the computer.
• For the signal types supported by the
projector, see the table on page 128.

Selecting an Input Signal Type (VIDEO)

[Input signal select]
COMPONENT
VIDEO
Display settings
You can select a proper signal type if a
video image from your AV equipment is
not projected correctly.
Press the OK button to accept your setting
and then press the MENU button.
• [Auto] is the factory default.
• Refer to the User's Manual of your AV
74
HDMI
DIGITAL PC
ANALOG PC
Input signal select
equipment connected to the projector to
confirm the input signal type.
COMPONENT
VIDEO
Display settings