Paper Problems - Canon Laser Shot LBP5000 User Manual

Paper Problems

Paper comes out wrinkled.
Cause 1
Remedy
Cause 2
Remedy
Paper curls.
7
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy 1 Set [Paper Type] to [Plain Paper L] in the printer driver.
Remedy 2 If the printed side curls outward, set [Special Print Mode] to [Special Settings 6];
7-26

Paper Problems

Paper is loaded in the paper cassette or manual feed slot at an angle.
Load the paper in the paper cassette or manual feed slot straight. (See "Loading
Plain Paper, Heavy Paper, Transparencies, or Labels in the Paper Source," on
p. 2-14, "Loading Index Card Size Media in the Paper Source," on p. 2-26,
"Loading Envelopes in the Paper Source," on p. 2-37, "Loading Custom Size
Paper (Non-Standard Paper) in the Paper Source," on p. 2-47)
Paper is damp since the paper has been stored in unsuitable condition.
Replace the paper with new one and print again. (See "Paper Requirements,"
on p. 2-2)
Paper is damp since the paper has been stored in unsuitable condition.
Replace the paper with new one and print again. (See "Paper Requirements,"
on p. 2-2)
Paper is inappropriate.
Replace the paper with one that can be used with this printer. (See "Paper
Requirements," on p. 2-2)
The paper is too thin.
In order to specify the setting for [Paper Type], display the [Paper Source] sheet.
if the non-printed side curls outward, set to [Special Settings 7]. If this solves the
problem, set [Special Print Mode] to [Off].
In order to specify the setting for [Special Print Mode], display the [Advanced
Settings] dialog box by clicking [Finishing Details] in the [Finishing] sheet, and
then clicking [Advanced Settings] in the [Finishing Details] dialog box.