Removing The Paper Feeder - Canon Laser Shot LBP5000 User Manual

Removing the Paper Feeder

Remove the paper feeder using the following procedure.
WARNING
Be sure to turn the printer and computer OFF, unplug the power plug, and then
disconnect all the interface cables and power cord from the printer before
removing the paper feeder. Otherwise, the power cord or interface cables may
be damaged, resulting in a fire or electrical shock.
CAUTION
• Do not carry the printer with the paper cassette attached. If you do so, the paper
cassette may drop resulting in personal injury.
• Do not carry the printer with the paper feeder installed. If you do so, the paper
6
feeder may drop resulting in personal injury.
IMPORTANT
When moving or servicing the printer, remove the paper feeder and paper cassette.
1
2
6-18 Paper Feeder
NOTE
After installing the paper feeder, you have to specify the settings for the optional
accessories in the [Configuration]/[Device Settings] sheet in the printer driver. You
can obtain the status of the optional accessories automatically by clicking [Get
Device Status] in the [Configuration]/[Device Settings] sheet.
Turn the printer and computer OFF, remove the USB cable,
and then disconnect the power plug from the AC power outlet.
Remove all the interface cables and the power cord from the
printer.