Canon Laser Shot LBP5000 User Manual page 336

3
Remove the screws and remove the protective plate for the
expansion slot.
IMPORTANT
The removed protective plate and screws are required when the network board is
removed. Keep them where they will not get lost.
4
Insert the network board into the expansion slot.
Hold the metal panel portions of the network board and insert the board while
aligning it with the guide rails inside the expansion slot.
IMPORTANT
• Do not touch the network board parts, printed wire, or connectors with your hands.
• Insert the printer connector of the network board securely into the connector inside
the expansion slot.
Network Board 6-23
6