Canon Laser Shot LBP5000 User Manual page 113

3
3
4
5
3-6 Installing the CAPT Software
Connect the A-type (flat) end of the USB cable to the USB port
on the computer.
Turn the computer on and start up Windows.
IMPORTANT
If a Wizard appears by the Plug and Play automatic setup, click [Cancel], and then
install the CAPT software using this procedure.
Insert the supplied "LBP5000 User Software" CD-ROM into
the CD-ROM drive.
If the CD-ROM is already in the drive, eject the disk and re-insert it into the drive.
IMPORTANT
If CD-ROM Setup does not appear, select [Run] from the [Start] menu, enter
"D:\English\MInst.exe", and then click [OK]. (The CD-ROM drive name is indicated
as "D:" in this manual. The CD-ROM drive name may differ depending on the
computer you are using.)